TSafe Tipper Inclinometer Safety System

Product Description

TSafe is a modular safety system that combines all the best features of our best-selling vehicle safety products. TSafe can be an Inclinometer, a high voltage overhead cable detector or both, combined with wireless capability and full event data recording. The TSafe display has a fully touch screen 3.5″ back-lit screen and a built-in spoken audio voice warning.

Inclinometer

The TSafe system features a new two axis inclinometer that can monitor the vehicles angle left to right and front to back up to a maximum of 23 degrees in 0.1 degree increments, to enable the TSafe system to be used on almost any type of vehicle from a small tipper to a large quarry dump truck. We have also incorporated a body raised sensor which allows separate alarm angles to be programmed for body up or down positions.

HVDS

Building on our vast experience of Overhead Power Cable Detection the new TSafe system has our most advanced HVDS yet. New detection circuitry gives almost double the detection range, sensitivity, and noise rejection over our existing HVDS unit. The TSafe’s HVDS can be fully adjusted to suit the operating environment and gives a visual indication of detected signal strength and range. A new high gain detection antenna further improves the systems detection capabilities giving full 360 degree high voltage cable detection out to 25mtrs on 11Kv overhead power lines.

Data Recording

The system has detailed event logging which records all alarm warnings, parameter and setting against a time and date stamp. In the event that an incident did happen then this data can be reviewed just like a black box flight recorder.